Recessed buried uplight with symmetrical light distribution. Round design available in two diameters: 285mm and 368mm. Its main feature is its low depth: 104mm or 120mm. IP68 protection rating that enables it to resist immersion to a depth of 1m. Protection rating for resistance to harmful mechanical impacts: IK10. Load supported: 2900Kg or 3800Kg depending on the fixture diameter. Can be driven over by vehicles with pneumatic tyres. Robust and corrosion-resistant because of its 18μ anodised aluminium housing and 316L stainless steel marine grade trim and screws. Total lighting control: high performance and high efficiency. High purity sandblasted anodised aluminium reflector to get the best photometric results. 15 mm tempered protection glass clear as standard, other finishes under request. Skid-blocking safety glass finishing (DIN 51130) for public areas walked by pedestrians can be supplied under request. Temperature resistant silicone rubber gasket. Optional supply of 304 stainless steel vandal-resistant screws. Integrated driver included. Electrical standard options for lighting control: DALI/ DSI. Optional emergency kit. Passive temperature management: heat dissipation via the fixture body itself. Supplied with aluminium insertion tube as standard. Ground mounted by two fixing holes. Double cable gland entry for installation in series. Pre-wiring of 1.5 metres cable 3x1,5mm. IP68 connector to be ordered separately.
Suggested applications: outdoor spaces: gardens, parks, pathways that may be affected by temporary flooding. Interior spaces in shopping malls, hotel and building entrances, cinemas, car parks, mechanical workshops, showrooms and similar installations. Suitable for installation in concrete, pavement and lawn. Floors where there is not much depth for recessed mounting.