KORAMU 200
220KRM.4-I723
Bollard with frontal light emission, symmetrical distribution.
Bollard height 602mm with 60º inclination from the horizontal axis.
Protection rating against dust and moisture: IP66 – full protection.
Protection rating for resistance against harmful mechanical impacts: IK10.
Extruded aluminium profile coated with polyester powder along with C4 treatment for corrosion resistance to guarantee further durability. Textured paint finish.
Different RAL colour finishes available under request.
C5-M special coating for highly corrosive environments is available under request.
4mm frontal polycarbonate diffuser.
Interior opal diffuser.
Anticondensation device.
Silicone gasket.
Highly efficient linear printed circuit board.
Built-in driver, included. Ambient temperature: up to 50ºC.
Electronic options for light control: DALI/DSI.
A4 stainless steel locking screw. Optional supply of A2 stainless steel vandal-resistant screws.
IP68 connector not included, it can be ordered separately: F3.A3 (On/Off) / F3.A5 (DALI).
Pre-wiring of 35cm cable 3x1mm2.
Mounting plate for floor installation supplied with the fixture.
Accessory for concrete installation reference F3.P1.KRM.
Accessory for grass installation reference F3.O1.KRM.
Lichtquelle Lichtstrom: 1165lm
Leuchten Lichtstrom: 525lm
Leuchten Lichtausbeute: 74 lm/W
Lichtquelle Watt: 6 W
Leuchten Watt: 7.1 W
mA: 150 mA
Ähnlichste Farbtemperatu: 2700K
Farborttoleranz: MacAdam 3
Farbwiedergabeindex: 80
Winkel: 91
Groupe de sécurité Photobiologique: 1
Dieses Produkt enthält eine Lichtquelle der Energieeffizienzklasse: D
Mittlere Bemessungslebensdauer: >60000h L80B10
Klasse: 1
IP: 66
IK: 10
Glühdraht: 850°Außenabmessungen: 62x65
Gewicht: 2.4 Kg
Elektronische Ausrüstung:
S: On/Off
D: DALI-2/DSI/switchDIM
SE: On/Off + 3 hours battery
DE: DALI-2/DSI/switchDIM+3 hours battery
DDE: DALI-2/DSI/switchDIM+3 hours battery (DALI)
There are available accessories for dimming devices.
*Ein beliebiges vorgenanntes Suffix zur Referenz hinzufüge, um die gewünschte elektronische Ausrüstung anzugeben.
Erweiterbar, austauschbar, reparierbar
Marken
ZUBEHÖR UND FINISHES
Standardausführungen
- 4: RAL7016: Anthrazitgrau
- 1: RAL9010: Reinweiß
- 2: RAL9005: Tiefschwarz
- 7: RAL9006: Weißaluminium
Weitere verfügbare Ausführungen
Erweiterbar, austauschbar, reparierbar
Marken
ZUBEHÖR UND FINISHES
Standardausführungen
- 4: RAL7016: Anthrazitgrau
- 1: RAL9010: Reinweiß
- 2: RAL9005: Tiefschwarz
- 7: RAL9006: Weißaluminium
Weitere verfügbare Ausführungen