LENTIE
101LNT.1.01-I865
Surface mounted fixtures with symmetrical light distribution. Wall fixtures with light emission on two sides.
Cylindrical design in 265mm diameter.
Protection rating against dust and moisture: entire IP65.
Protection rating for resistance to harmful mechanical impacts: IK10.
Robust body made of die-cast aluminium and trim coated with polyester powder along with C4 treatment for corrosion resistance to guarantee further durability. Textured paint finish.
Different RAL colour finishes available under request.
C5-M special coating for highly corrosive environments is available under request.
Sandblasted metalized aluminium reflector.
Impact resistant cover made of clear polycarbonate (IK10).
Optional clear glass diffuser (IK05). Frosted or painted diffuser finishes under request.
Temperature resistant silicone rubber gasket.
Two anti-condensation device.
A4 stainless steel locking screw. Optional supply of A2 stainless steel vandal-resistant screws [reference 2 x F2.A0265 + F2.01].
Built-in driver, included. Ambient temperature: up to 50ºC.
Passive temperature management: heat dissipation flows through the fixture body itself.
Mounting to the wall through mounting plate with two fixing holes.
Two cable entry from the fixation plate.
Luminous flux of the light source: 2x 2125lm
Luminous flux of the luminaire: 2x 1339lm
Luminaire efficiency: 53 lm/W
Light source power: 2x 11 W
Luminaire power: 25.22 W
mA: 350 mA
Colour temperature: 4000K
Chromaticity Tolerance: MacAdam 3
CRI: >80
Beam angle: 102
Cd/ Klm: 295
Photobiological safety group: 1
This product contains a light source of energy efficiency class: D
Rated Median useful life: 50000h L90B10
Class: 1
IP: 65
IK: IK10
Incandescent filament: 850°Luminaire diameter: 265mm
Weight: 6.85 Kg
Electronic Equipment:
S: On/Off
D: DALI-2/DSI/switchDIM
There are accessories available for dimming devices.
*Add the suffix after the reference to indicate your electronic equipment choice.