LUMIA 100 161LMA.41-I1218
Linear fixture in 589mm length, width of 75mm and height of 85mm.
Protection rating against dust and moisture: complete IP66.
Protection rating for resistance to harmful mechanical impacts: IK10.
Extruded aluminium profile coated with polyester powder along with C4 treatment for corrosion resistance to guarantee further durability. Textured paint finish. Different RAL colour finishes available under request. C5-M special coating for highly corrosive environments is available under request.
Highly efficient linear printed circuit board.
Protection polycarbonate diffuser in 4mm.
White finish modular optics in 14 cells designed to ensure visual comfort.
Built-in driver.
Electronic options for lighting control: DALI-2.
The driver contained in this luminaire complies with European Directive 2009/125/EC establishing flicker limits: PstLM ≤ 1 and SVM ≤ 0.4.
IP67 venting valve to reduce condensation.
A4 stainless steel locking screw. Optional supply of A2 stainless steel vandal-resistant screw.
Ceiling-mounted using steel support with screws.
Pre-wiring of 35cm cable 3x1mm2.
The electric cable inlet is on one end of the luminaire. Luminaires can also be supplied with two cable inlets, one on each side, for serial installation, reference F3.L1.DST.
Concrete housing in galvanised metal accessory reference F3.F.0589DST.
The driver is on the inside of the fixture.
Passive temperature management.
Luminaire luminous flux: 900lm
Luminaire connected power: 10,42 W
Luminaire efficiency: 86 lm/W
Light source luminous flux: 1500lm
Light source power: 7,4 W
mA: 200 mA
Colour temperature: 4000K
Chromaticity Tolerance: MacAdam3
CRI: 80
Photobiological risk: 1
This product contains a light source of energy efficiency class: B
LED reliability at nominal Ta = 25ºC: 90.000h L80B10
Class: 1
IP: 66
IK: 10
Incandescent filament: 650
Embedding dimensions: 579mm x 65mm
Luminaire dimensions: 589mm x 75mm
Electronic Accessories:
S: On/Off (AC/DC)
D: DALI-2/switchDIM/corridorFUNCTION
B: Bluetooth-Casambi
-
+ C5-M : special coating for very high corrosivity environments -
41: RAL7016 Anthracite Grey - White reflector
All RAL colours are available under request
Downloads
-
+ C5-M : special coating for very high corrosivity environments -
41: RAL7016 Anthracite Grey - White reflector
All RAL colours are available under request